Wood stains Colorit


Wood stain with wax


Excellent resistance to external effects. Without unpleasant odours. Thick-film semi-transparent coating for wood protection and decoration in indoor and outdoor exploitation conditions Its properties include easy workability and excellent resistance to external effects. Quick drying. Ecological paint – very low content of volatile organic compounds.

Substrate Preparation

Substrate has to be hard, dry, free of grease and other impurities. Before application of AQUAWOOD WAX, it is recommended to polish the wood to obtain smooth surface. To keep the good appearance of the wood longer, AQUAWOOD PRIMER for wood should be applied that penetrates deep into the wood and protects it against degradation. The primer represents, at the same, time a bridge binding the substrate and the applied material, creating a stronger bond and reducing consumption of material.


Mix well before use and then shake again to ensure as good homogenization of the compound as possible. After that apply AQUAWOOD WAX in two layers, evenly, in the same direction to obtain a uniform coating. Drying time between two layers should be from 4 to 6 hours, depending on the temperature and relative air humidity. Polishing with fine-grit sanding paper is recommended between the layers. Applied using a brush or a trowel. Optimal air and substrate temperatures during application and drying should be from +10°C up to +30°C, and relative humidity should be under 80%. Do not work in wind, rain, for or in direct sun. Wash tools with water immediately after use. Skimming compound in its original, well sealed and undamaged packaging may be kept for a subsequent use.


0,7l≈7-10m2 in one layer, depending on the substrate absorption and roughness.


0.7 l container, 6 pieces, 1 box
4 l container, 2 pieces, 1 box



Consumption calculator



COLORIT d.o.o.
Blagoja Parovića 114b
78 000 Banja Luka
Republika Srpska, BiH

Tel: +387 51 388 820, 388 830
Fax: +387 51 388 840
Email: info@coloritbl.com


Our products

Unutrašnje boje.
Ljepila za keramiku.
Mase za izravnjavanje i popunjavanje.
Lazurni premazi.
Podloge i impregnacije.
Fasadne boje.
Fasadna ljepila.
Ljepila za parket i drvo.
Toplotni fasadni sistem.