Levelling and filling compounds  

R-KIT is a compound based on plaster, filler and additives. It is intended for rough levelling of major uneven surfaces on interior walls of up to 3 mm in thickness.

Substrate has to be hard, dry, free of dust, grease and other impurities. Before application of the material, walls must be cleaned and impregnated with PODLOGA KONCENTRAT primer (dilution ratio : PODLOGA KONCENTRAT: water=1:3). The drying time of the PODLOGA KONCENTRAT is around 6 hours, after which the application of R-KIT may start. PODLOGA KVARC primer is recommended for smooth concrete surfaces.

Use a 2 kg bag of R-KIT per cca. 0.8 l of water and mix using a slow-speed mixer until a homogeneous compound is obtained. Leave such material to rest for about 2 to 3 minutes and then mix it again. The compound’s working time is around 30 minutes. The resting time after application and before polishing is around 12 hours, depending on the temperature and thickness of the layer, and around 2-3 days for finishing. R-KIT is applied using a stainless trowel or a spatula. The maximum thickness of the coating is around 3 cm. After application, fine smoothing may be performed using appropriate levelling compounds and after that painting using dispersive paints. Optimal air and wall temperatures during work and drying should be from +5°C up to +25°C. Wash tools with water immediately after use.