GLET C
Skimming compound for interior walls
Characteristics
Exceptional workability.
White powdery compound based on lime, mineral fillers and additives. Designed for fine levelling of interior walls. EN 998-1-GP CSII WO skimming compound for general use.
Substrate Preparation
Substrate has to be hard, dry, free of dust, grease and other impurities. Loose surfaces should be removed. Treatment of humid and permanently humid walls is not recommended. Before the material is applied walls must be impregnated with PODLOGA KONCENTRAT primer (dilution ratio: PODLOGA KONCENTRAT: water=1:3). The drying time of the PODLOGA KONCENTRAT is around 6 hours, after which the application of the first layer of GLET C may start. PODLOGA KVARC primer is recommended for smooth concrete surfaces.
Application
Use a 4 kg bag of (20 kg) GLET C per cca. 1.6 l (8.4l) of water and mix using a slow-speed mixer until a homogeneous compound is obtained. Leave such material to rest for about 10 to 15 minutes and then mix it again. The working time of the compound is 24 hours if kept in a closed container. GLET C is applied in two layers using a stainless trowel. After the second layer, small-grit sandpaper should be used for polishing, if needed, in order to obtain as smooth surface as possible. Optimal air and wall temperatures during work and drying should be from +5°C up to +25°C. Wash tools with water immediately after use. Due to its composition (lime content), GLET C may have an aggressive effect on subsequently applied dispersive pints. For that reason, drying of 21 days is recommended for GLET C, just like obligatory application of PODLOGA KONCENTRAT, in particular before the application of dispersive tinted paints.
Consumption
= 1.5 - 2 kg/m2 depending on the wall quality
Packaging
4 kg bag, 226 pieces, 1 pallet = 904 kg
20 kg bag, 42 pieces, 1 pallet = 840 kg