MOLERIN A
Interior paint
Characteristics
Provides perfect coverage and pure whiteness.
Water-dilutable paint for interior walls. Matt finishing coat. High level of whiteness. Very good covering power. Good vapour permeability. Easy to use. Resistant to dry cleaning. Ecological paint – very low content of volatile organic compounds.
Substrate Preparation
The substrate should be hard, dry and clean free of dust, grease and oil. Old and loose paint should be removed mechanically. Uneven surfaces should be levelled using GLET C or GLET-P products for interior wall skimming. Before application of MOLERIN A, walls should be cleaned and impregnated with PODLOGA KONCENTRAT primer (dilution ratio: PODLOGA KONCENTRAT water=1:3). The drying time of the PODLOGA KONCENTRAT is around 6 hours, after which the application of the first layer of MOLERIN A may start.
Application
Before its application, MOLERIN A should be diluted with water (cca. 10-15%), after which the entire volume should be homogenized by mixing to achieve adequate consistency. MOLERIN A may be tinted by adding POLITON (max. 200 g per 25 kg of paint) The second layer of material is applied on the completely dried first layer. The drying time between the two layers should be from 4 to 6 hours. MOLERIN A is applied using rollers with short fibres or brushes in at least two layers. To avoid shade variations due to the tying of surfaces, it is necessary to wok without interruptions on wall surfaces. Wash tools with water immediately after use. Air and wall temperatures during work and drying should be from +10°C up to +30°C, and relative humidity should be under 80%. In case of painting of large surfaces using the same shade, the shade should be equalized in a container that is big enough depending on the quantity of material.
Consumption
1 kg = 3-4m2 for double-layer coating
Packaging
3 kg container, 120 pieces, 1 pallet = 360 kg
8 kg container, 60 pieces, 1 pallet = 480 kg
15 kg container, 33 pieces, 1 pallet = 495 kg
25 kg container, 24 pieces, 1 pallet = 600 kg