Decorative transparent coating


Kristalit is a decorative weather-resistant finishing coat. It produces an additional glittering silver effect. Material is ready-to-use. It is suitable as a finishing coat on: acrylic, silicate, silicate-silicone and silicone facades.

Substrate Preparation

Before applying KRISTALIT. The wall should be clean, dry, free of grease and other impurities, without loose spots and without visible defects.

It is suitable as a finishing coat on: acrylic, silicate, silicate-silicone and silicone façades.


Before use, the material should be mixed and after that it is ready for use. During application, occasional mixing is recommended to obtain better material homogeneity. It is applied in one layer, evenly, moving the roller at the end in the same direction to obtain a visually uniform coating.

Drying lasts for about 12 hours (T=200C ± 20C,rel.air humidity≈65%). Works should not be performed in windy and rainy weather conditions, and in direct sun.

Use protective sheets.

Optimal air and wall temperatures during work and drying should be from + 100C up to + 250C, and relative humidity should be under 80%. Note: Application of KRISTALIT may slightly darken the shade of the finishing coat. Wash the tools with water immediately after use.


1 kg ≈ 5-8 m2 for one-layer coat, depending on surface absorption and roughness.


containers of 1 kg, containers of 5 kg



Consumption calculator



COLORIT d.o.o.
Blagoja Parovića 114b
78 000 Banja Luka
Republika Srpska, BiH

Tel: +387 51 388 820, 388 830
Fax: +387 51 388 840
Email: info@coloritbl.com


Our products

Unutrašnje boje.
Ljepila za keramiku.
Mase za izravnjavanje i popunjavanje.
Lazurni premazi.
Podloge i impregnacije.
Fasadne boje.
Fasadna ljepila.
Ljepila za parket i drvo.
Toplotni fasadni sistem.